• Connect all your devices with gigabit switch: Aumox gigabit PoE ethernet switch offers 18*10/100/1000 Mbps Base-TX RJ45 ports, including 16 PoE ports which automatically identifies and powers PoE devices. Built-in power supply makes adapter no more needed, easier to use.
• Multiple installation options: Supports desktop, wall or rack placement, and the 19-inch length conforms to more switch racks,
• Sturdy metal casing and less noise: Sturdy metal casing and powerful industrial-grade fans for better heat dissipation while effectively reducing noise, enabling longer-lasting operation in a variety of temperature environments, making the switch run more stable.
• Plug and play, faster and easier: Support automatically detect devices, just plug in the power cord and network cable, no configuration required. Full Gigabit port, high speed transmission, intelligent and powerful data transmission is realized by AUMOX rich features.
• Stable power supply, efficient data transmission: The single-port maximum power of the switch is 30W and 250W of the whole machine. Supporting IEEE802.3af/at network standards, with output power of 15.4W/30W, ideal for PoE Camera, Gaming, WiFi Access Point, IP Phone.
• One-Key VLAN: VLAN switch, PoE ports will be isolated respectively but can communicate with uplink port, Better Network Bandwidth, 100m fully gigabit distance and higher security. Ideal for PoE IP Camera, EAP, Access Point, IP Phone and other PD devices.

• 1 Poe port and 1 uplink port at 10/100/1000Mbps each
• Up to 30W of power over ethernet. 1.5KV lightning protection.
• Surface or wall mount, can also be slotted side-by-side with multiple injectors
• Built-in power supply for All-in-One design (uses standard included grounded AC cord)

PoE+ power injector

• An adapter that can power UniFi PoE devices with wireless mesh applications, or offload PoE switch power dependencies.
• Delivers up to 15W of PoE
• Compatible with most UniFi Protect cameras and some APs such as U6+ and U6 Mesh
• Surge, peak pulse, and overcurrent protection
•Contains RJ45 data input, AC cable with earth ground, and PoE output
• LED indicator for status monitoring

• Ubiquiti Networks UniFi Switch PoE 24 US-24-250W 24-Port Managed PoE+ Gigabit Switch with SFP
• The UniFi Switch delivers robust performance, PoE+ support, and intelligent switching for growing networks.
• The UniFi Switch delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port
• Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.
• The UniFi Switch features auto-sensing IEEE 802.3af/at PoE to power multiple devices on the network.

• Flexible Full Gigabit 8-Port Port Configuration: 4× PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE power budget of 62W, together w/ 4x Gigabit Non-PoE Ports for high-speed connections.
• Integrated into Omada SDN: Omada SDN platform integrates network devices, including switches, access points & gateways with multiple control options offered - Omada Hardware controller or Omada Software Controller. Standalone Mode also applies.
• Cloud Access: Remote cloud access and Omada app brings centralized cloud management of the whole network at different sites-all controlled from a single interface anywhere, anytime.
• SDN Compatibility: For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN switches, access points & gateways. Non-SDN controllers work only with non-SDN access points. For devices that are compatible with SDN firmware, please visit TP-Link website.
• Enhance Network Security: Advanced security features include 802.1Q VLAN, IP-MAC-Port binding, ACL, Port Security, DoS defend, Storm control, DHCP Snooping, 802.1X radius authentication and more.
• Advanced Software Features: Prioritize your traffic and guarantee high quality of video or voice data transmission with L2/L3/L4 QoS, IGMP Snooping, Link Aggregation and Flow Control.

• Flexible Full Gigabit 10-Port PoE Configuration: 16× PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE power budget of 150W, together w/ 2× Gigabit SFP slots for high-speed connections.
• Support Omada SDN: Omada SDN platform integrates network devices, including switches, access points & gateways with multiple control options offered – Omada Hardware controller or Omada Software Controller. Standalone Mode also applies.
• Cloud Access: Remote cloud access and Omada app brings centralized cloud management of the whole network at different sites—all controlled from a single interface anywhere, anytime.
• SDN Compatibility: For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN switches, access points & gateways. Non-SDN controllers work only with non-SDN access points. For devices that are compatible with SDN firmware, please visit TP-Link website.
• Enhance Network Security: Advanced security features include 802.1Q VLAN, IP-MAC-Port binding, ACL, Port Security, DoS defend, Storm control, DHCP Snooping, 802.1X radius authentication and more.

• Flexible Full Gigabit 28-Port PoE Configuration: 24× PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE budget 384W, together w/ 4 x Gigabit SFP slots for high-speed connections.
• Support Omada SDN: Omada Software Defined Networking platform integrates network devices, including switches, access points & gateways with multiple control options offered - Omada Hardware controller or Omada Software Controller. Standalone mode also applies.
• Cloud Access: Remote cloud access and Omada app brings centralized cloud management of the whole network from different sites-all controlled from a single interface anywhere, anytime.
• SDN Compatibility: Make sure your devices/controllers are equipped with SDN firmware. (Or upgradable). SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. Details found on TP-Link website.
• Enhance Network Security: Advanced security features include 802.1Q VLAN, IP-MAC-Port binding, ACL, Port Security, DoS defend, Storm control, DHCP Snooping, 802.1X radius authentication and more.

• Hardware Controller with Professional Network Management-Centralized management for up to 100 Omada devices including Omada access points, Omada Security Gateways and Jetstream switches.
• Premium Hardware Design-Industry-leading flexible Rackmount/Desktop design with a powerful chipset, durable metal casing, 2 fast ethernet ports and 1 USB 2.0 port for auto backup.
• Dual power selection-Support PoE (802.3af/802.3at) and micro-USB for flexible installations.
• Easy Network Monitor & Maintenance-The easy-to-use dashboard makes it simple to see your real-time network status and improve network maintenance for peace of mind.
• Cloud Access with No License Fee-Enjoy cloud service with no license fee with the use of OC200. Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime.
• SDN Compatibility-For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. OC200 work only with SDN access points, switches & gateways. For devices that are compatible with SDN firmware, please visit TP-Link website.

• Unmanaged
• Power Over Ethernet: The 10-Port PoE switch provides a reliable PoE solution featuring 8 PoE ports (10/100Mbps) and 2 Gigabit Ethernet uplink ports (10/100/1000Mbps). Compliant with IEEE802.3af/at standard, it can deliver up to 30W for each PoE port and has a total power budget of 120W for at most 8 PoE devices.
• Intelligent Power Management: This PoE switch features the power management mechanism, so when the total allocated power exceeds the power budget (120W), the lower priority PoE port will be powered off one by one until the total power is below the threshold that the PoE switch is capable of supplying, which ensures the high priority PoE port’s power supply and protects the device from power overload.
• Auto Detection of Adaptive Devices: The PoE switch will automatically detect whether the device connected to its ports is a PoE device and whether it needs to be powered. To avoid damage, it will not supply power to non-PoE devices.
• Plug and Play, Easy Set up: Reolink RLA-PS1 PoE switch works perfectly with your PoE cameras with only one Ethernet cable required. Easy to set up even for beginners. You can mount the PoE switch on the wall or desktop, perfect solution for a variety of environments.
• Designed to meet your different needs: The PoE switch can be directly connected to your NVR for higher reliability and security, or it can be connected to the same LAN as your NVR to support more features of your cameras. If you don't have an NVR, you can also connect your PoE camera and router directly through the PoE switch.